Spiral Galaxy 2
This sculpture is a wall-mounted relief carved from a single piece of Black Walnut. The wood grain is a central visual element: layered bands of light and dark tones follow the spiral’s motion, enhancing the sense of rotation and depth. The carving is highly dimensional, with undulating ridges and recessed channels that create dramatic shadows, making the surface feel almost geological or fluid, as if the wood were flowing inward.
The spiral suggests multiple interpretations: a whirlpool, vortex, galaxy, or natural force such as wind or erosion. The central hole acts as a focal point, evoking ideas of origin, collapse, or infinite motion. The slightly irregular lower edge contrasts with the precise square format, reinforcing a tension between natural processes and human design.
Overall, the sculpture feels dynamic and immersive, combining organic texture with strong geometric framing, and invites contemplation of movement, time, and natural energy frozen in wood.
Dims: 16″ H x 17” W x 2″D.
White Fibonacci
SOLD, This shell wall sculpture was carved from a large stump of white Ash. Inspired by the Fibonacci golden spiral. Textured, sandblasted and white-washed with a Satin finish, Dims: 33″ W x 20” H x 2″D.
Blue Fibonacci
This shell wall sculpture was carved from a large red oak tree. Inspired by the Fibonacci golden spiral. Textured, sandblasted and blue with a satin finish. 33″W x 20″H x 2″D
Maple Fibonacci
This sculpture is a wall-mounted relief carved from a single piece of Maple. It takes the form of a spiral shell, strongly reminiscent of a nautilus or ammonite, and visually echoes the Fibonacci or golden-ratio spiral found in nature.
The surface is deeply hand-carved with radiating grooves that fan outward from a small central opening, creating a sense of motion and growth. Each ridge is irregular and faceted, showing clear tool marks that emphasize craftsmanship and texture rather than smooth perfection. The carving transitions from tighter, sharper ridges near the center to broader, flowing planes toward the outer edge.
The natural wood grain is an integral part of the design, with warm honey and caramel tones, darker streaks, and subtle variations that enhance the organic feel. The outer edge is slightly raised and smoother, framing the spiral like a natural boundary.
Carved from a beautiful ambrosia silver maple tree. The design was inspired by the Fibonacci golden spiral. Carved, textured and finished with satin lacquer. Dims: 26″W x 16″H x 2″D.
Moonlight Twist
Sculpture lathe turned, carved and textured from white ash wood. Sandblasted and dyed with a lacquer finish. 7″ Diameter x 27″ Tall.
Starburst
Cut from the base of a large red oak tree. Bleached, wire brushed and textured surface, dyed dark blue. A 20 Lb form carved down from a 160 Lb log.
Oak Star
9-pointed Star form wall sculpture carved and textured from a beautiful spalted Pin Oak stump.
Oil finish, 26″ x 26″ x 7″ deep, 3/4″ thick , 15 lbs sculpted down from 175
lbs.
Spiral Movements
Quarter-sawn Oak sand-textured with an oil finish.
Dimensions: 24”W x 24”H x 17”D, Weight = 5 Lbs.
This is a 2 piece sculpture that can be positioned in multiple arrangements for display.
Merging
Quarter-sawn Oak., Sandtextured & dyed black with an oil finish.
Dimensions: 24”H x24”W x 24”D
Ribbon of Oak
This sculpture was carved from some beautiful marbled pin oak. The form was sculpted, deeply sandblasted and coated with linseed oil base finish to enhance the vibrant grain coloring. Dimensions: 36”H x 7.5” W x 7.5”d. The close-up images of the sandblasted textured surface reveal beautiful medullary rays that flow with the form.
Denim Ring
Wall sculpture, Carved and sandblasted Oak. 24″ diameter x 5″ deep x 1/2″ thick. Carved out of a 100 Lb slab of Red Oak.
Oak Star 44
“Oak Star 44″, Wall sculpture, 11-pointed star form. Carved and textured from a 44 year old Pin Oak tree. Dyed and sand-textured with an oil finish, 29″ Diameter x 8″ deep, 3/4” thick, 22 lbs sculpted down from a 270 lb re-purposed log.
Ribbon Wall Sculpture
Wall sculpture carved from a beautiful 90 Lb block of Maple burl down to 6 Lbs. Dyed black with a smooth satin oil finish.
Feathered
Wall sculptured carved from a large white ash crotch section. The crotch section is the intersection of two main branches with the trunk of the tree. The area between the branches has beautiful feathered figure and is prized by wood artists and cabinet makers. Dims: 32”H x 19”W x 2”D.
Spiraled Ash
Wall sculptured carved from a large white ash tree crotch section. This section is between the branches has beautiful feathered figure and is prized by wood artists and cabinet makers Lightly textured and sandblasted, oil finish. . Dims: 32”H x 18”W x 2”D.
Spiral Galaxy 3
This sculpture is a wall-mounted relief carved from a single piece of Black Walnut. The wood grain is a central visual element: layered bands of light and dark tones follow the spiral’s motion, enhancing the sense of rotation and depth. The carving is highly dimensional, with undulating ridges and recessed channels that create dramatic shadows, making the surface feel almost geological or fluid, as if the wood were flowing inward.
The spiral suggests multiple interpretations: a whirlpool, vortex, galaxy, or natural force such as wind or erosion. The central hole acts as a focal point, evoking ideas of origin, collapse, or infinite motion. The slightly irregular lower edge contrasts with the precise square format, reinforcing a tension between natural processes and human design.
Overall, the sculpture feels dynamic and immersive, combining organic texture with strong geometric framing, and invites contemplation of movement, time, and natural energy frozen in wood.
Dims: 13″ H x 30” W x 2″D
Maple Galaxy
Wall sculpture carved from a beautiful piece of Red Maple with extra sapwood. Textured and sandblasted surface, finished with Danish Oil. Dims: 15″ H x 32” W x 2″D.
Red Star Galaxy
Wall sculpture carved from a beautiful piece of Eastern Red Cedar. Textured, sanded and bleached surface, finished with Danish Oil. Dims: 38” W x 14″ H x 2″D.
Maple Galaxy II
This sculpture is a wall-mounted relief carved from a single piece of Maple. It has an organic, flowing composition: deep, curved grooves radiate outward from a small circular opening near the center, creating a swirling, vortex-like effect.
The carving emphasizes the natural grain of the wood, with alternating light and dark tones that accentuate the sense of motion and depth. The surface is faceted and textured, showing deliberate tool marks that catch the light and enhance the three-dimensional quality. The outer edges are irregular rather than perfectly straight, reinforcing a natural, handcrafted feel.
Overall, the piece feels dynamic and meditative at the same time—suggesting movement, energy, or a galaxy-like spiral, while also highlighting the inherent beauty and structure of the wood itself. Carved from a beautiful piece of Red Maple with extra sapwood. Textured and sandblasted surface, finished with lacquer & Danish Oil. Dims: 14″ H x 32” W x 2″D.