Additional information
| Dimensions | 2 × 33 × 20 in |
|---|
$ 2,400.00
This shell wall sculpture was carved from a large red oak tree. Inspired by the Fibonacci golden spiral. Textured, sandblasted and blue with a satin finish. 33″W x 20″H x 2″D
| Dimensions | 2 × 33 × 20 in |
|---|

Wall sculpture carved from a beautiful piece of Eastern Red Cedar. Textured, sanded and bleached surface, finished with Danish Oil. Dims: 38” W x 14″ H x 2″D.

This sculpture is a wall-mounted relief carved from a single piece of Maple. It takes the form of a spiral shell, strongly reminiscent of a nautilus or ammonite, and visually echoes the Fibonacci or golden-ratio spiral found in nature.
The surface is deeply hand-carved with radiating grooves that fan outward from a small central opening, creating a sense of motion and growth. Each ridge is irregular and faceted, showing clear tool marks that emphasize craftsmanship and texture rather than smooth perfection. The carving transitions from tighter, sharper ridges near the center to broader, flowing planes toward the outer edge.
The natural wood grain is an integral part of the design, with warm honey and caramel tones, darker streaks, and subtle variations that enhance the organic feel. The outer edge is slightly raised and smoother, framing the spiral like a natural boundary.
Carved from a beautiful ambrosia silver maple tree. The design was inspired by the Fibonacci golden spiral. Carved, textured and finished with satin lacquer. Dims: 26″W x 16″H x 2″D.

This shell wall sculpture was carved from a beautiful ambrosia silver maple tree. The design was inspired by the Fibonacci golden spiral. Carved, textured and finished with Danish oil.

This shell wall sculpture was carved from a beautiful large stump of white Ash. Inspired by the Fibonacci golden spiral. Textured, sandblasted then finished with Danish Oil, Dims: 29″ W x 18” H x 2″D.

SOLD, This shell wall sculpture was carved from a large stump of white Ash. Inspired by the Fibonacci golden spiral. Textured, sandblasted and white-washed with a Satin finish, Dims: 33″ W x 20” H x 2″D.

This beautiful form was sculpted from a piece of Pin Oak. The form was inspired by working with Fibonacci curves. Sanded then sandblasted to open the grain lines. Blue milk paint wash with a satin finish. Dims: 21.5″x12.5”x2”D. SOLD

This wall sculpture was inspired by a scallop shell and carved from a beautiful piece of spalted pin oak. The form radiates outward from a central point, with deeply incised ridges creating a rhythmic fan pattern that echoes natural shell geometry. Rich variations in the wood grain accentuate the flowing contours, producing a sense of movement and depth. The irregular, undulating edge retains an organic quality, balancing precision craftsmanship with the spontaneity of natural growth. This is an end grain carving which is the most difficult orientation to pull off. It yields the best color and contrast between the sapwood & heartwood. It was sandblasted to showcase the grain and the medullary rays.

This sculpture is a wall-mounted relief carved from a single piece of Black Walnut. The wood grain is a central visual element: layered bands of light and dark tones follow the spiral’s motion, enhancing the sense of rotation and depth. The carving is highly dimensional, with undulating ridges and recessed channels that create dramatic shadows, making the surface feel almost geological or fluid, as if the wood were flowing inward.
The spiral suggests multiple interpretations: a whirlpool, vortex, galaxy, or natural force such as wind or erosion. The central hole acts as a focal point, evoking ideas of origin, collapse, or infinite motion. The slightly irregular lower edge contrasts with the precise square format, reinforcing a tension between natural processes and human design.
Overall, the sculpture feels dynamic and immersive, combining organic texture with strong geometric framing, and invites contemplation of movement, time, and natural energy frozen in wood.
Dims: 16″ H x 17” W x 2″D.
