Additional information
| Weight | 10 lbs |
|---|---|
| Dimensions | 22 × 13.5 × 2 in |
Walnut Fibonacci
SOLD This shell wall sculpture was carved from a beautiful black walnut tree. The design was inspired by the Fibonacci golden spiral. Carved, textured and finished with Danish oil.
Related Products
Rewind
This wall sculpture is a flowing ribbon-like form that undulates vertically in an S-shaped rhythm. Carved from red oak and sandblasted to expose the grain patterns that flow with the curved surface. The interior tones range from warm browns and golden hues to darker, almost black areas, while the outer edge is outlined with a dark border, emphasizing the contours.
The overall effect is organic and dynamic, resembling waves, a twisting leaf, or a sinuous natural form frozen in motion. The clean white background highlights the sculpture’s texture, depth, and rhythmic curves.
Wall sculpture, Red Oak sculpted down from a 80 Lb slab to 7 Lbs, sand-textured and dyed black with an oil finish. 31″Tall x 14″ Wide x 7″ Deep
Oak Seashell
This wall sculpture was inspired by a scallop shell and carved from a beautiful piece of spalted pin oak. The form radiates outward from a central point, with deeply incised ridges creating a rhythmic fan pattern that echoes natural shell geometry. Rich variations in the wood grain accentuate the flowing contours, producing a sense of movement and depth. The irregular, undulating edge retains an organic quality, balancing precision craftsmanship with the spontaneity of natural growth. This is an end grain carving which is the most difficult orientation to pull off. It yields the best color and contrast between the sapwood & heartwood. It was sandblasted to showcase the grain and the medullary rays.
Maple Fibonacci
This sculpture is a wall-mounted relief carved from a single piece of Maple. It takes the form of a spiral shell, strongly reminiscent of a nautilus or ammonite, and visually echoes the Fibonacci or golden-ratio spiral found in nature.
The surface is deeply hand-carved with radiating grooves that fan outward from a small central opening, creating a sense of motion and growth. Each ridge is irregular and faceted, showing clear tool marks that emphasize craftsmanship and texture rather than smooth perfection. The carving transitions from tighter, sharper ridges near the center to broader, flowing planes toward the outer edge.
The natural wood grain is an integral part of the design, with warm honey and caramel tones, darker streaks, and subtle variations that enhance the organic feel. The outer edge is slightly raised and smoother, framing the spiral like a natural boundary.
Carved from a beautiful ambrosia silver maple tree. The design was inspired by the Fibonacci golden spiral. Carved, textured and finished with satin lacquer. Dims: 26″W x 16″H x 2″D.
Walnut Sunrise
Wall sculpture carved from a beautiful piece of Black Walnut. Textured, sandblasted and bleached surface, Satin finish. Dims: “18 H x 20” W x 2″D.
Ambrosia Ribbon
This sculpture is a flowing, wall-mounted abstract form made from Spalted Ambrosia Maple . It unfolds in a rhythmic sequence of curved, ribbon-like lobes that rise and dip across the wall, creating a sense of continuous motion—almost like a frozen wave or a strip of wood caught mid-dance.
Each section is hollowed and concave, revealing dramatic natural patterns in the wood: swirling grain, dark spalting lines, and warm amber-to-honey tones. The edges are crisply defined with a dark border, which sharply outlines the organic shapes and emphasizes their silhouette against the wall. This contrast makes the forms feel both precise and alive.
The sculpture balances symmetry and variation: the central forms are broader and more open, while the outer ends taper and curl inward, giving the piece a dynamic beginning and end. Light plays across the interior surfaces, deepening shadows and highlighting the natural textures, so the work changes subtly depending on viewing angle and illumination.
Overall, the sculpture feels both sculptural and musical—suggesting movement, breath, or sound—while celebrating the inherent beauty and unpredictability of the wood itself.
This form was sculpted from a beautiful piece of Spalted Ambrosia Silver Maple. The shape was inspired by ribbon candy. Sanded carefully and finished with shellac and satin wax. Dims: 22″x14”x7”H. This wall sculpture can be mounted vertical or horizontal.
Available 2/28/2026
Blue Fibonacci
This shell wall sculpture was carved from a large red oak tree. Inspired by the Fibonacci golden spiral. Textured, sandblasted and blue with a satin finish. 33″W x 20″H x 2″D
Ambrosia Fibonacci Shell
This shell wall sculpture was carved from a beautiful ambrosia silver maple tree. The design was inspired by the Fibonacci golden spiral. Carved, textured and finished with Danish oil.
Maple Seashell
This new wall sculpture is shaped like a scallop shell, carved with deep radiating grooves that fan outward from a central point. The smooth curves and rich tonal variations in the wood grain evoke both natural erosion and organic growth, blending coastal imagery with refined craftsmanship. Dims: 10 ½”H x 11”W x 4 ½”D