Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 10.5 × 7 × 35 in |
Ribbon in the Wind
$ 3,600.00
This sculpture was carved from a red oak tree. The form was sculpted, sandblasted and dyed black. A liming wax was applied to create vibrant pinstriping. Dimensions: 7”D x 10.5” W x 35”H
Related Products
Textured Shell
Wall sculpture turned & carved from a piece of red oak. The shape was inspired by ocean shell forms. Textured & sandblasted with a white-wash and lacquered finish, Dims: 14.5″ Dia. x 2″D.
Rewind
Wall sculpture, Red Oak sculpted down from a 80 Lb slab to 7 Lbs, sand-textured and dyed black with an oil finish. 31″Tall x 14″ Wide x 7″ Deep
Starburst
Cut from the base of a large red oak tree. Bleached, wire brushed and textured surface, dyed dark blue. A 20 Lb form carved down from a 160 Lb log.
Spiral Galaxy 3
Wall sculpture carved from a beautiful piece of black walnut with extra sapwood. Textured and sandblasted surface, finished with Danish Oil. Dims: 13″ H x 30” W x 2″D
On Course
‘On Course’, This form is 29″ Tall x 14″ x 8″. I started with a 90 Lb Ambrosia red maple half log and carved it down to 7 Lbs . Light Lacquer finish.
Grey Area
Elegant Abstract sculpture that was turned and carved from maple. Textured, sanded and painted chalk grey & white. Finished with satin lacquer.
Ribbon of Oak
This sculpture was carved from some beautiful marbled pin oak. The form was sculpted, deeply sandblasted and coated with linseed oil base finish to enhance the vibrant grain coloring. Dimensions: 36”H x 7.5” W x 7.5”d. The close-up images of the sandblasted textured surface reveal beautiful medullary rays that flow with the form.